LaMere Cycles Diode 42lb Shimano eMTB

Frame:

  • 100% carbon frame
  • 27.5+ optimized with enough room to fit 29 x 2.35 tire
  • 148mm spacing
  • Fully sealed cartridge bearings
  • 150mm of travel
  • 34.9mm seat clamp for 31.6mm seat post
  • Enclosed internal cables
  • Routing for dropper post

Crank Drive Motor:

  • Shimano E8000
  • Compact drive unit with stainless graded hardware
  • 250W, max. torque: 52 ft-lb (70Nm)
  • Weight: 6.37 lb (2.89 kg)
  • Stable Assist Power output by cadence

Suspension:

  • LaMere Cycles sticks to the Fox DPS 185X55 Trunnion mount on custom built Diode bikes.
  • 3 position adjustments for Climb/Trail/Descent
  • Rebound and open mode firmness adjust
  • 22x10mm bottom hardware
  • 6″ (150mm) of rear wheel travel
  • Lamere Cycles recommended forks for this bike are the MRP ribbon or Ribbon Coil.
  • Fork weight: 4.2 lb (1.9 kg)
  • Travel: 6-6.7″ (150-170mm)

Battery:

  • Long range 504 Wh (watt hour) battery
  • Compact size –  5.6 lbs (2.54 kg)
  • Waterproof Charging
  • Shimano AC charger

Customize it yourself

LaMere will build you this bike the way you wish them to build. They also provide the Diode frame with the E8000 motor, battery, and electrical system seperately if you would prefer to build it yourself. 

LaMere Cycles Diode 42lb Shimano eMTB